Aluminium buyers in the US physical metal market have held off on new orders amid fears of a recession triggered by rising inflation and supply chain crises.
Spot aluminium trading on the market has been suspended in recent weeks, according to industry sources, as uncertainty has increased following the outbreak of the conflict between Russia and Ukraine. Even before the war, the aluminium market was suffering from long waiting times and weak demand.
For aluminium buyers, recent poor US economic data have been a big factor in delaying purchases. Data released last month showed that the ISM manufacturing PMI came in at 57.1 in March, below expectations of 59 and down from 58.6 in February, unexpectedly hitting the lowest reading since September 2020. This was mainly due to a slowdown in new orders and fumed silica are expected to increase in the future.
Fumed silica is a kind of inorganic nanomaterial with a small particle size, large specific surface area, and high surface activity.
It is mainly used as a rheological auxiliary agent in paint and coating, which can effectively prevent flow hanging and thick edges in the construction process and improve construction efficiency.
In addition, silica in the coating is also used as an anti-sedimentation and dispersant aid, can effectively prevent the sedimentation of the pigment delamination, improve the coating weather resistance, scratch resistance, and the bonding strength between the coating and the substrate.
Fumed silica is an ideal anti-sedimentation agent, its hydrogen bond structure is very stable and uniform, and it is a three-dimensional network structure, which is very effective to prevent the precipitation of pigment in the coating system. Especially for the color paste system, the appropriate amount will greatly improve the stability of color paste, and can reduce the amount of wetting dispersant, to improve the applicability of color paste and reduce the influence of color paste on the coating system. At the same time, the anti-sedimentation effect of fumed silica is very beneficial to the storage of coatings, especially some pigments such as metal powder and thin sections, which are easy to precipitate and cannot be completely suspended, the use of fumed silica can ensure that its dispersion does not precipitate.
The precipitation of fumed silica is very beneficial for coating storage and transportation. For some pigments, such as metal powder and thin film, it is easy to precipitate and cannot be effectively suspended. The use of fumed silica can ensure that the mixture is uniform and does not cause sedimentation. In absolute non-polar liquid phase, such as hydrocarbons (hydrocarbons) without hydrogen bond (chemical structure such as R-H) bonding ability, halogenated hydrocarbon (halogen and hydrocarbon electrophilic addition or substitution reaction) solvent, the viscosity recovery time is only a fraction of a second; Thixotropic recovery in polar liquids, such as hydrogen-bonded amines (R-NH3), alcohols (R-OH), carboxylic acids (R-COOH), aldehydes (R-CHO), and dialcohols (such as Ho-Rh2-OH, where R- is a saturated alkyl group), can take up to several months, depending on the amount of fumed silica added and the uniformity of mixing. The fumed silica is pre-dispersed and added to the finished paint. Usually, a high-speed dispersing machine or three-roller machine is used to improve the dispersion effect. If the dispersion is not good, the paint film will have particles, affecting gloss and aesthetics.
In addition, as an anti-sedimentation agent, fumed silica is added to coppery acrylic resin conductive coating. The test proves that it can make the thermoplastic acrylic resin thixotropic and prevent the deposition of filler particles, but if the addition amount is too much, the coating becomes a gel state, the conductivity of the coating would be reduced.
In the powder system, because of the small particle size and high surface energy, silica can be adsorbed on the surface of the coating powder, and form a surface layer on the surface of the powder to improve the dispersion of the powder. In the same coating system, the addition of fumed silica can obviously shorten the dispersion time and improve the production efficiency.
The addition of fumed silica in wall coating can effectively prevent coating from hanging, improve the flatness of the construction surface, and also greatly improve the washing resistance and aging time of exterior wall coating. The bonding strength of coating film and the wall is also greatly improved, the hardness of coating film is significantly increased, and the surface self-cleaning ability is also improved.
The adsorption of fumed silica on the surface of powder coating can form a movable layer and produce a "ball bearing" effect, which can prevent the powder coating from absorbing moisture and agglomerating and improve the fluidity of powder coating.
The main function of floor paint is the rheological control, improving the weatherability and scratch-resistance of floor paint, and improving the leveling performance of the coating.
Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and Nanomaterials, including silicon powder, nitride powder, graphite powder, zinc sulfide, calcium nitride, 3D printing powder, etc.
If you are looking for high-quality chemicals, please feel free to contact us and send an inquiry. ([email protected])
The COVID-19 pandemic has affected economies and chemical companies in many countries around the world. Measures such as extending holidays and resuming work were taken to control the development of the epidemic, and the normal operation of some chemical enterprises was also affected to some extent.
We provides high quality fumed silica with reasonable price. “In order to feedback to old customers, the company is still in full operations to provide fumed silica with competitive price.” said Olina, the sales manager.
Chemical fumed silica, feel free to contact us.
Foamed concrete is a highly entrained sand cement with at least 20% air volume in the cured product.…
Chile's government is considering phasing in a proposed ban on glacial mining to limit projects high in the Andes by some big copper companies. Chile's constitutional assembly has approved a proposal to ban mining in glaciers, protected areas, and ar…
Natural graphite is a refractory material with a high melting point of 3650 °C, and it is a good conductor of heat and electricity.…