After Russia pledged to scale back its military operations around Kyiv and in northern Ukraine, the prices of most industrial metals fell, led by aluminum, showing people's concerns for supply shortage eased.
At an earlier time, the West imposed sweeping sanctions on Russia for its invasion of Ukraine, which aroused concerns about the supply problem because Russia is a major producer of nickel, aluminum, and copper.
Russia is also a major gas supplier to Europe, where potential supply disruptions are seen as hitting power-intensive aluminum and zinc CoCrW Powder are still very uncertain.
About 3D Printing Alloy CoCrW Powder:
3D Printing Alloy CoCrW Powder is one of the Stellite alloys, which are hard alloys resistant to various types of wear and corrosion as well as high-temperature oxidation. Namely commonly referred to as cobalt-based alloy. Initially, the Stellite alloy is a cobalt-chromium binary alloy and later developed into a cobalt-chromium tungsten ternary composition. Cobalt-Cr-W alloy is an alloy with cobalt as the main component, containing a considerable amount of chromium and tungsten and a small amount of nickel, molybdenum, silicon, carbon, niobium, tantalum and occasionally iron. Depending on the composition of the alloy, they can be made into welding wire, powder for hard surfacing, thermal spraying, spray welding and other processes, as well as cast and forged parts and powder metallurgy parts.
The basic composition of cobalt-chromium-tungsten alloy is: Co:50%~58%,Cr:28%~30%,W:4%~6%,Ni:2%~4% and other alloy composition, melting point is 1470℃.As can be seen from the composition of the alloy, the cobalt and tungsten content of the alloy are very high, which makes the material has excellent high-temperature performance and has poor thermal conductivity. It is these characteristics that make the cobalt-chromium tungsten alloy in the grinding process spark is dark red, the number of sparks is very small, the metal from the workpiece surface is easy to block the grinding wheel, so that the grinding conditions quickly deteriorate, at the same time produce a lot of grinding heat can not quickly spread, resulting in low efficiency, workpiece surface burns. Feel free to send an inquiry to get the latest price if you would like to buy 3D Printing Alloy CoCrW Powder in bulk.
3D printing CoCrW bonding alloy powder
Composition(percentage by mass)
Additional elements less than 1%: N, Nb
Contains no nickel, beryllium or iron
|category||Alloy grades and characteristics|
|Particle size:||0-20μm, 15-45μm, 15-53μm, 53-105μm, 53-150μm, 105-250μm|
|Morphology:||Spherical or nearly spherical|
|Package:||Aluminum bag, Vacuum packing|
|Application:||3D printing metal powder|
|Other applications:||powder metallurgy(PM), injection molding(MIM), spray painting(SP) etc.|
How is 3D Printing Alloy CoCrW Powder produced?
The waste iron is smelted to the melting point, and then the eight raw materials of cobalt, chromium, tungsten, sulfur, silicon, carbon, aluminum and copper are added in turn, and then the temperature is reduced to 1150-1200°C for high-temperature solution treatment for 40-60min, and then the temperature is again reduced to 880-970°C for aging treatment for 2-3h, and the cobalt, chromium and tungsten alloy is obtained through annealing treatment again.
Applications of 3D Printing Alloy CoCrW Powder:
CoCrW powder is one of the rough alloys that can resist various types of wear, corrosion and oxidation at high temperatures. Depending on the composition of the alloy, they can be made into welding wires, powders for hard surface substrates, thermal spray, and spray. They can also be made into castings, forgings and powder metallurgy parts.
COCRW powder can be used in laser/electron beam additive manufacturing (SLM/EBM), powder metallurgy (PM), spraying, welding and other processes. The powder is mainly used for 3D printing of biomedical materials, such as teeth, body supports, artificial joints, etc.
Cobalt-Cr-W alloy is widely used in locomotive engines, nuclear power plant valves, Marine engines and various aircraft.
Early cobalt-chromium - tungsten alloys were produced by non - vacuum smelting and casting processes. Later developed alloys, such as MAR-M509 alloy, which contains more active elements such as zirconium and boron, are produced by vacuum smelting and vacuum casting.
Generally, cobalt-chromium-tungsten alloy lacks a uniform strengthening phase. Although its strength is low at medium temperature (only 50-75% of that of nickel-based alloy), it has high strength, good thermal fatigue resistance, thermal corrosion resistance and abrasion resistance at temperatures higher than 980℃, and good weldability. It is suitable for the production of guide vane and nozzle guide vane of aviation jet engine, industrial gas turbine, naval gas turbine and nozzle, etc.
Storage Condition of CoCrW Powder:
The damp reunion will affect CoCrW powder dispersion performance and using effects, therefore, CoCrW powder should be sealed in vacuum packing and stored in cool and dry room, the CoCrW powder can not be exposure to air. In addition, the CoCrW powder should be avoided under stress.
Packing & Shipping of CoCrW Powder:
We have many different kinds of packing which depend on the CoCrW powder quantity.
CoCrW powder packing:vacuum packing, 100g, 500g or 1kg/bag, 25kg/barrel, or as your request.
CoCrW powder shipping: could be shipped out by sea, by air, by express, as soon as possible once payment receipt.
Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and Nanomaterials, including boron powder, nitride powder, graphite powder, zinc sulfide, 3D printing powder, etc.
If you are looking for 3D printing metal powder, please feel free to contact us and send an inquiry, email address: email@example.com
3D Printing Alloy CoCrW Powder Properties
|Other Names||Cobalt Chromium Tungsten, Cobalt 6B, Stellite 6B ,Co-Cr-W|
|Appearance||Gray metallic solid in various forms (ingot, tubing, pieces, powder)|
|Solubility in water||N/A|
|Particle Size||0-20μm, 15-45μm, 15-53μm, 53-105μm, 53-150μm, 105-250μm|
|Exact Mass||294.824632 g/mol|
|Monoisotopic Mass||294.824632 g/mol|
3D Printing Alloy CoCrW Powder Health & Safety Information
Researchers at the Centre for Translational Atomic Materials at Swinburne University of Technology, Melbourne, Australia have developed a new graphene film that absorbs more than 90% of sunlight while eliminating most of the infrared thermal emission losses, a highly efficient A solar-heated metamaterial capable of rapidly heating to 83 degrees Celsius (181 degrees Fahrenheit) in an open environment with minimal heat loss. Proposed applications for the film include thermal energy harvesting and storage, solar thermal power generation, and seawater desalination.
Our company provides graphene CoCrW Powder , if you need to buy graphene and CoCrW Powder , please feel free to contact us.
Whether the cement used and the pumping agent are matched and adapted must be obtained through the adaptability test. The optimum amount of the pumping agent should be determined through the adaptability test with the cement cementitious material.…
Factors affecting freight forwarder how much is a 20 shipping container Freight transportation In international freight transport, one of the most concerning issues is the price of freight transport. The cost is directly related to the c…
Metal 3D printing is a 3D printing technology that uses metal powder to directly print metal parts, also known as metal powder sintering (SLM).…